StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Gas turbine engine basics - Coursework Example

Cite this document
Summary
Since drag is proportional to speed, drag also increases till it equals thrust. When drag again equals thrust, the aircraft travels at constant higher speed.
When SI system is used,the basic unit of force is the…
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER92.3% of users find it useful
Gas turbine engine basics
Read Text Preview

Extract of sample "Gas turbine engine basics"

Download file to see previous pages

This means that if the exit velocity is maintained at a higher value than free stream velocity, and simultaneously, the engine flow rate (m dot) is kept as high as possible, the high engine flow will produce a high thrust in a turboprop engine. Even though a large amount of air is ingested, the change in velocity is very minimal between the intake and the exit so that the exit velocity is at a low value (Low exit velocity). Due to the large value of m dot, a high thrust is developed. If we denote the free stream conditions by “0”, the propeller exit conditions by “1”, core exit conditions by “e” and core entrance conditions by “c”, then from the basic thrust equation we get: In Turboprop engine, the mass flow rate through the propeller is much greater than that of core engine(High mass flow ).

The mass flow rate entering the core is almost equal to the mass flow rate exiting the core. The exit velocity from the core is almost the same as inlet velocity into the core(Low exit velocity). Hence the thrust equation can be rounded off to get: Components and Purpose: The intake also called the inlet serves three purposes, namely (1) recovering as much of the total pressure of the free air stream required for combustion, from free-stream conditions to the conditions and deliver this pressure to the entrance of fan or compressor, (2) delivering air to the compressor under all flight conditions with minimum turbulence and (3) to have minimum drag.

The inlet is generally not defined by any particular part, but is formed by structural support parts which are located in front of compressor. The design of subsonic inlet differs from that of supersonic inlet. In subsonic inlets of engines fitted in nacelles air enters in different streamline patterns at different speeds of operation as shown in Fig-1 (Mattingly,p759). Supersonic inlets are

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Gas turbine engine basics Coursework Example | Topics and Well Written Essays - 2000 words - 2”, n.d.)
Retrieved from https://studentshare.org/physics/1586712-gas-turbine-engine-basics
(Gas Turbine Engine Basics Coursework Example | Topics and Well Written Essays - 2000 Words - 2)
https://studentshare.org/physics/1586712-gas-turbine-engine-basics.
“Gas Turbine Engine Basics Coursework Example | Topics and Well Written Essays - 2000 Words - 2”, n.d. https://studentshare.org/physics/1586712-gas-turbine-engine-basics.
  • Cited: 0 times

CHECK THESE SAMPLES OF Gas turbine engine basics

The Jet Engine Analysis

They make use of force produced by thrusts within the engine.... Gas turbines are a combination of all jet… The component parts of the jet engine allows for the study of its functionality based on the very specific parts that are brought together to make up the engine.... This report is therefore aimed at studying this Changes that have been characteristic of the jet engine will also be highlighted, owing to the dynamism of technology over time....
9 Pages (2250 words) Research Paper

Layout and Operation of a Jet Engine

Categorized as turbojet, turbofan, turboprop, or turboshaft engine, the gas turbine engines are the most significant breakthrough in the history of aviation.... This paper 'Layout and Operation of a Jet engine" focuses on the fact that at the beginning of the 13th century, Chinese invented rockets by using the physical principle of action-reaction.... The practical application of stream turbine was widely appreciated when the practical application of the steam engine was dominating (Hunecke 2011)....
9 Pages (2250 words) Case Study

Gas Turbine Engine Compressors - Comparison

This paper seeks to elaborate on… The paper also seeks to explore recent advances that have occurred in the design of gas turbine compressors. A centrifugal compressor is a rotodynamic Its working fluid is air.... It is comprised of a rotating compressor, a combustion chamber and turbine.... The diffuser converts the high velocity (kinetic energy) of the fluid into pressure by increasingly diffusing the velocity of the gas....
5 Pages (1250 words) Essay

Detailed Cycle Analysis of Turbofan Engine

Turbofan is simply a gas turbine engine and a ducted fan.... The gas turbine… The ducted fan accelerates the air rearwards.... Fan – The fan is at the obverse of the engine.... The fan initiates a flow of air around the engine.... The bypass air usually keeps the engine quieter, cooler and more fuel efficient.... The two whirling turbines rotate the shafts that steer both the fan and the compressors at the front part of the engine....
8 Pages (2000 words) Essay

Vibration monitoring of Gas Turbine in oil industry

gas turbine in oil industry utilizes the fluid-film in bearings in both their and axial and radial shaft support.... Some gas turbine Condition Monitoring and Protection System that can be used are: i.... As a result the alarm setting will remains same as before despite different speeds of the turbine.... This report makes a comprehensive examination of the vibration monitoring of gas turbines in the oil industry taking a critical review of the available literature....
8 Pages (2000 words) Essay

Turbine Engines Design

The analysis discusses the gas turbine engine, with a focus on turbine types and applications of the turbines to the prime mover.... The analysis discusses the gas turbine engine, with focus on turbine types and applications of the turbines to the prime mover.... Increase in the speed of the turbine engine results into the increase in the centrifugal forces of rotating components.... Heavy industrial turbine engine, developed from the slower industrial steam turbines....
2 Pages (500 words) Assignment

Aircraft Gas Turbine Blade

This work called "Aircraft gas turbine Blade" describes the functions of the gas turbine blades in the jet engine with the specialized nature of the engine coming into focus.... hellip; Perhaps the most important aspect of the gas turbine variously referred to as the jet engine is this specificity of combustion parameters.... A series of blades are aligned along the length of the jet gas turbine in order to facilitate the achievement of the high energy output required for the engine....
8 Pages (2000 words) Coursework

Performance Deterioration of Gas Turbine Engines

This gives an example of how performance degradation is linked to the mechanical behavior and consistency of a gas turbine engine.... The paper "Performance Deterioration of gas turbine Engines" investigates the prognostic methodology that will be able to determine and predict degradation as a single parameter.... hellip; Compressor fouling and its limitations are the most predominant area that heavily influences gas turbine deterioration.... he use of high-performance gas turbine engines has increased fuel costs making it essential for maintaining high working efficiencies of the engines....
6 Pages (1500 words) Research Paper
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us